Laser Plywood – Poplar – 3mm – 300mm x 200mm (10pk)

This is a high-quality AB/AB Italian Panguaneta Poplar Plywood sheet (laserply) that is suitable for a wide range of applications and is particularly suited to laser cutting. Panguaneta manages its own woodlands, so it knows that every last sheet has been produced responsibly, sustainably, and to the highest of standards. This Poplar Plywood has an AB/AB grading which is typically the best grade of plywood available.

Poplar has a lower density than Birch, meaning that it can be easily laser cut at lower power settings

Please note:

As wood is a natural product, there is often a crook or bow to the sheet. The natural twist might be in excess of 25mm. The surface of the material will be consistent in appearance with no large variations in colour. Small pin knots are allowed and these would typically be only a few mm in diameter.

This plywood uses an EN314-2 Class 1 glue which is suitable for Interior (dry) conditions. Interior glue is generally considered the preferred option for materials that are to be laser cut. This is because the exterior glues can cause a more obvious ‘burnt’ look on and around the area that is cut.

Poplar is a cultivated wood that grows quickly, which makes it a very sustainable product.

Features:

• High-quality poplar laser plywood sheets (laserply).
• Low density for easier laser cutting.
• Top-quality AB/AB grading meaning fewer knots aiding consistency of laser cutting.
• Interior grade glue.

Contents:

• 10 x 3mm Poplar Laser Plywood (laserply), 300mm x 200mm Sheet.

Individual Sheet Dimensions:

• Length: 300mm.
• Width: 200mm.
• Height: 3mm.