eufyMake Exhaust Duct Kit

eufyMake Exhaust Duct Kit for Your E1 Printer

Complete your E1 air-filtration setup with the eufyMake Exhaust Duct Kit. This genuine accessory supplies the printer-side connection needed to route air towards the Purifier P1. Therefore, it forms an important part of the setup when connecting the P1 to your E1 UV printer.

eufyMake E1 Exhaust Duct for the Purifier P1

The eufyMake E1 exhaust duct guides air from the printer into the P1’s connecting hose. Meanwhile, the purifier filters that air before returning it to the room. As a result, this setup does not require an outdoor exhaust outlet.

However, the duct kit is connection hardware, not a fan or air purifier. It does not filter air on its own. Instead, use it alongside the compatible purifier and hose to complete the air path.

E1 Ventilation Accessory for Larger Printing Projects

The E1’s standard bed and roll-to-film attachment require the side door to stay open during printing. Consequently, the printer’s built-in filter cannot capture everything in these open setups.

This E1 ventilation accessory provides the connection for external air management. Therefore, it helps you add the P1 when preparing your workspace for larger projects and longer printing sessions.

eufyMake Exhaust Duct Kit – Technical Specifications

• Brand: eufyMake.
• Product type: Printer-side exhaust duct kit.
• Compatible printer: eufyMake E1 UV Printer.
• Compatible air purifier: eufyMake Purifier P1, using its connecting exhaust hose.
• Compatible hose system: The P1’s 50.8mm / 2-inch exhaust hose system.
• Fitting location: The E1 printer’s air-filter chamber.
• Function: Routes printer air towards connected external air-management equipment.
• Air treatment requirement: A separate compatible purifier or exhaust fan; the duct kit does not provide standalone filtration.

What’s Included with the eufyMake Exhaust Duct Kit?

• Printer exhaust duct / air guide.
• Exhaust duct cover.
• Hose connector.

The E1 printer, Purifier P1, powered exhaust fan and flexible exhaust hose are not included.

Installing Your P1 Purifier Duct Kit

First, follow eufyMake’s installation guide to fit the air guide in the printer’s air-filter chamber. Next, fit the matching cover and connect the correct hose. Then, connect the other end to your purifier and check each fitting before use. Always follow the installation instructions for your complete air-management system.

Also, check your existing accessories before ordering. The full eufyMake Exhaust Fan Kit already includes an exhaust duct and duct cover, so you may already have the printer-side parts.

Buy the eufyMake Exhaust Duct Kit from GM Crafts

Finish planning your E1 workspace with the right connection parts. Order the eufyMake Exhaust Duct Kit from GM Crafts for your compatible P1 air-filtration setup.