eufyMake E1 Exhaust Fan Kit

eufyMake E1 Exhaust Fan Kit for Your Printing Space

Make ventilation part of your creative setup with the eufyMake E1 Exhaust Fan Kit. This dedicated accessory draws air from the E1 printing area and sends odours outdoors through a flexible hose. As a result, it offers a practical extraction option for studios and workshops with a suitable window or exterior vent.

Unlike an indoor air purifier, this kit vents air outside rather than filtering it for reuse indoors. Therefore, plan your outdoor outlet before installation.

E1 Exhaust Fan for Stable Print Quality

Strong extraction should not disturb your artwork. The E1 exhaust fan uses a purpose-built air duct and balanced pressure to support stable print quality. Furthermore, the system supports open-format printing with the standard bed or roll-to-film attachment.

UV Printer Ventilation Kit with Three Fan Modes

Choose Standard mode for flat printing or Strong mode for longer, textured projects. Alternatively, use Silent mode after printing when lower noise matters. The UV printer ventilation kit gives you three settings, so you can match extraction to your task.

The fan uses a single button for power and speed selection. As a result, you can adjust your eufyMake E1 fume extraction setup directly at the unit.

Flexible Exhaust Fan Placement for Your Workspace

Place the unit on your desk or use the supplied wall-mount kit to free up workspace. Meanwhile, the flexible hoses help you route the exhaust to your chosen outlet. Protect the outdoor hose opening from rain, snow and wind-blown debris.

eufyMake E1 Exhaust Fan Kit – Technical Specifications

• Brand: eufyMake.
• Model: T520Q.
• Product type: External UV printer exhaust fan kit.
• Compatible printer: eufyMake E1 UV Printer.
• Control method: Single-button power and speed selection.
• Manufacturer-listed fan speed: 4,300RPM.
• Rated power: 48W.
• Unit dimensions: 215 × 180 × 198mm.
• Unit weight: 1.45kg.
• Fan modes: Silent, Standard and Strong.
• Manufacturer-listed air pressure: 480Pa.
• Silent mode noise: As low as 40dB.
• General noise specification: 50dB, as listed by the manufacturer.
• Exhaust hose diameter: 50.8mm / 2 inches.
• Supplied hose lengths: 1m and 3m.
• Window adapter outer diameter: 5.62 inches.
• Placement options: Desktop or wall mounting.
• Venting requirement: A suitable outdoor exhaust outlet.

What’s Included with the eufyMake E1 Exhaust Fan Kit?

• eufyMake exhaust fan.
• Power adapter.
• Printer exhaust duct.
• Exhaust duct cover.
• 1m exhaust hose with connector.
• 3m exhaust hose with connector and a 2-inch to 5.62-inch window adapter.
• Wall-mount kit with two brackets, four screws and one hex key.
• Quick Start Guide.

The eufyMake E1 printer is not included.

Setting Up Your eufyMake E1 Fume Extraction

First, follow the installation guide to fit the printer duct and cover. Next, connect the hoses and arrange the outdoor exhaust route. Keep the fan clear of curtains and blinds. Then, check every connection before starting your printing session.

For reliable airflow, keep the fan, air guide and filter screen clean. In addition, check these parts regularly and follow eufyMake’s cleaning instructions. This helps prevent dirt from restricting the air path.

Buy the eufyMake E1 Exhaust Fan Kit from GM Crafts

Order your eufyMake E1 Exhaust Fan Kit from GM Crafts for your printing space. Whether you create personalised gifts or small batches for customers, make ventilation part of your workspace plan.