Anker SOLIX Alternator Charger

Anker SOLIX Alternator Charger for Power on the Move

Make your driving time work harder with the Anker SOLIX Alternator Charger. This accessory recharges a compatible portable power station through your vehicle’s electrical system. As a result, you can recover useful battery capacity between stops, rather than wait for a mains socket at your destination. It suits road trips, campervan adventures and mobile work where charging opportunities matter.

This is a charging accessory, not a standalone power station or storage battery. Your connected power station stores the energy and supplies power to your devices.

800W Alternator Charger for Faster Charging

Move beyond the limited charging power of a standard vehicle accessory socket. The Anker alternator charger uses a dedicated battery connection to deliver higher charging power to supported power stations.

Consequently, you can add more energy during a journey. However, the connected power station’s input limit still applies. Actual charging speed also depends on vehicle conditions, battery temperature and the charge level.

Smart App Control for Your Anker Vehicle Charger

Manage charging through the Anker app using Bluetooth or Wi-Fi. Start or stop charging, change supported modes and adjust power from your phone.

Furthermore, the charger monitors starter battery voltage and alternator output to help protect the vehicle’s electrical system. Select the correct battery type during setup, so the charger uses suitable charging settings.

Charging also pauses when battery voltage falls below the configured threshold. Therefore, correct setup matters as much as choosing the right equipment.

Reverse Charging with the Anker SOLIX Alternator Charger

The Anker SOLIX Alternator Charger also supports vehicle battery recharging with a suitable power station and connection. However, this needs the Expansion Port Output Cable, which is a separate purchase. The supplied XT-60i cable only charges the power station.

Before using reverse charging, check support for your exact power station, cable and firmware. Charging compatibility alone does not confirm support for every operating mode.

Anker SOLIX Alternator Charger – Technical Specifications

Charging Performance

• Brand: Anker SOLIX.
• Product: Alternator Charger.
• Model: AS200.
• Charger type: DC-to-DC vehicle charging accessory.
• Maximum charging output: 800W.
• Vehicle battery input in Charging Mode: 12V or 24V DC, up to 80A.
• Power station output in Charging Mode: 12–60V DC, up to 25A, with an 800W maximum.
• Power station input in Reverse Mode: 40–60V DC, up to 21A.
• Vehicle battery output in Reverse Mode: 11–28.8V DC, up to 70A, with an 800W maximum.

Vehicle Compatibility and Controls

• Supported vehicle electrical systems: Suitable 12V and 24V starter battery systems.
• Supported battery types: LiFePO4 and compatible lead-acid batteries, including AGM, flooded and gel.
• Electric vehicle compatibility: Not compatible with fully electric vehicles.
• Wireless connectivity: Bluetooth and Wi-Fi.
• App controls: Charging start/stop, supported mode selection and power adjustment.
• Battery monitoring: Starter battery voltage and alternator output monitoring.

Power Station Compatibility

• Manufacturer-listed charging models include: Anker SOLIX C1000, C1000 Gen 2, C2000 Gen 2 and F3000.
• C1000 and C1000 Gen 2 connection: Supplied PPS XT-60i cable.
• C2000 Gen 2 and F3000 fast-charging connection: Anker specifies the additional Expansion Port Output Cable.
• Maximum charge rate: Subject to the connected power station’s input limit and the approved connection method.

Dimensions and Operating Conditions

• Dimensions, width × height × depth: 218 × 119 × 68mm.
• Net weight: 1.3kg.
• Operating temperature: −20°C to 60°C.
• Storage temperature: −20°C to 85°C.

The charger’s temperature range does not override your power station’s charging limits. Always check both products before use in very hot or cold conditions.

What’s Included with the Anker SOLIX Alternator Charger?

• Anker SOLIX Alternator Charger.
• PPS XT-60i power station connection cable, 1m.
• Vehicle battery connection cable, 7m.
• 100A fuse wire.
• Installation board.
• Six installation screws.
• User documentation.
• Safety and warranty information.

The portable power station, expansion batteries and optional Expansion Port Output Cable are not included.

Installing Your Anker SOLIX Vehicle Charging System

First, confirm that your vehicle, power station and cables support the planned setup. Also, check that the alternator has enough spare capacity after powering the vehicle’s normal systems.

Next, choose a secure, well-ventilated position for the charger. Route the wiring away from heat, sharp edges and moving parts. Follow Anker’s installation instructions and use the specified fuse protection.

For high-current vehicle wiring, use a qualified automotive electrician unless you have the necessary skills. Finally, secure the power station before travelling and check for unusual heat or electrical warnings during initial use.

Buy the Anker SOLIX Alternator Charger from GM Crafts

Prepare for your next journey with the Anker SOLIX Alternator Charger from GM Crafts. Whether you travel for work or head away for the weekend, build your charging setup around the equipment you use.